ARGILETZ GREEN CLAY 2 STRIPS

Descriptions
Argiletz Green Clay 2 Strips is quick to apply, highly effective. This strip contains all the authentic qualities of Argiletz clays to provide lasting relief for tired or aching muscles. All that's left is to apply a thicker green clay poultice, if you wish, to completely erase any unpleasant sensation.

Directions for use
Cut or tear off the desired length for application. Textilit strips tear easily due to their cellulose nature. Moisten the clay with cold or lukewarm water so that exchanges with the surface layers of the skin can take place quickly. Moistening the strip, or spraying water onto the strip, is recommended rather than soaking. This moistening can be repeated several times during the application. Apply the bandage without stretching the bandage. For a good hold, apply: Either with a minimum of three wraps. Or by folding in two or three layers across the width. After moistening, the strip provides comfort for the duration of its hold. The absence of clay particles on the surface of the strip gives a very soft, pleasant contact, which is particularly appreciated. If necessary, hold in place with stretch film, possibly covered with a neutral bandage. Leave on for about an hour, more if possible. Reapply 2 to 3 times a day and as often as necessary, several days in a row.

Storage
Keep dry. Protect from frost.

Composition
Set of 2 strips, each 5m long and 8.5cm wide, giving an application area of 0.45m². Textilit tape: 100% biodegradable cellulose non-woven. Pressurised impregnation of the strip by spraying green clay, ensuring that the clay forming the Textilit strip penetrates right to the core (now invisible thanks to the complete filling of all the meshes). The clay is intimately bonded to the cellulose fibres, so it cannot disintegrate, preventing any clay powder from escaping during application. Thanks to this impregnating power, and the density with which the Clay clings to the tape, there is no need to thicken the tape as there is no more wastage.