ALCON OPTI-FREE PUREMOIST 90 ML

Descriptions
Alcon Opti-Free PureMoist 90 ml is a multi-function decontamination solution for soft contact lenses and silicone hydrogel lenses.

Alcon Opti-Free PureMoist Multi-function Solution is used daily for cleaning, renovation, rinsing, removal of lipid and protein deposits, prevention of lipid deposits, chemical (non-thermal) decontamination and storage of all soft (hydrophilic) contact lenses and silicone hydrogel lenses.

Directions for use
- Before handling: Completely remove the safety ring present around the cap before use. Always wash and dry your hands before handling lenses. Clean, renew, rinse and decontaminate lenses each time they are removed. Always start handling with the same lens, left or right, to avoid mixing them up. After use, always empty the contents of the dip case, rinse with Alcon Opti-Free PureMoist and allow to air dry.
- Manipulation: Wet each side of the lens ( 5 seconds) with Alcon Opti-Free PureMoist. Massage the lens for 20 seconds. Rinse each side of the lens for 10 seconds with a steady stream of Alcon Opti-Free PureMoist. Fill the Alcon soaking case with a fresh amount of Alcon Opti-Free PureMoist. Leave the lenses in the closed lens case overnight or for at least 6 hours. After rinsing, the lenses are ready to wear.
- Storage: If debris remains on the contact lenses, rinse them with Alcon Opti-Free PureMoist before inserting. Lenses may be left in their closed soaking case containing Alcon Opti-Free PureMoist for up to 30 days. After this time, lenses must be re-cleaned and decontaminated with Opti-Free PureMoist before wearing.
- Storage period : Discard any remaining solution 6 months after first opening.

Precautions for use
Store at room temperature. Contraindicated in case of hypersensitivity to any of the components of the product. Do not replace Alcon Opti-Free PureMoist with a saline solution for storing contact lenses. Saline solution does not decontaminate lenses. Always use a fresh supply of Alcon Opti-Free PureMoist multifunctional decontamination solution. Never reuse the solution from the soaking case. To avoid contamination, never touch anything with the tip of the bottle. Do not use for hot (thermal) decontamination. Keep out of the reach of children. If the following signs appear: persistent discomfort in the eye, excessive tearing, changes in vision, redness of the eye, remove the lenses immediately and consult an ophthalmologist. Store upright.

Composition
polyquad ( polyquaternium-1 ) 0.001%, aldox (myristamidopropyl dimethylamine) 0.0006%, tetronic 1304 qs hydraglyde hydrating matrix, (eobo-41 polyoxyethylene-polyoxybutylene) qs, excipients: sodium citrate, sodium chloride, boric acid, aminomethylpropanol, sorbitol, disodium edetate.